Volatility of propoxur from different surface materials commonly found in homes

The purpose of this study was to determine the volatilization rates of propoxur from different surface materials commonly found in homes, and to conduct field measurements under ventilated and non-ventilated conditions. Since it is known that temperature, humidity and constant air flow most significantly affect volatility, various surface materials were sprayed using a constant amount of propoxur under the controlled conditions of an exposure chamber. Acetonitrile was used to desorb both XAD-2 resin that collected airborne propoxur and surface materials containing propoxur residue. HPLC was used to analyze propoxur concentrations. Based on multiple regression models, temperature most significantly affected volatility, followed by humidity. Volatilization rates of propoxur were highest from quartz surfaces and lowest from glass. Interaction was most readily found on glass surfaces based on humidity-air flow and humidity-temperature factors. In field applications, propoxur was sprayed in a room under two conditions with ventilation and without in order to measure the concentrations of propoxur in the air and on a quartz surface. Findings showed both airborne and settled concentrations peaked after a half hour then decreased under both conditions, both more sharply in the ventilated room. Under both conditions, no propoxur was detected on the quartz surface after three and a half hours but airborne concentrations remained detectable after thirty-three and one half hours. We conclude that to maintain good air quality, ventilation is important and special care must be taken when spraying insecticides on different surfaces.     

Biogas production from anaerobic digestion of food waste and relevant air quality implications

Biopower can diversify energy supply and improve energy resiliency. Increases in biopower production from sustainable biomass can provide many economic and environmental benefits. For example, increasing biogas production through anaerobic digestion of food waste would increase the use of renewable fuels throughout California and add to its renewables portfolio. Although a biopower project will produce renewable energy, the process of producing bioenergy should harmonize with the goal of protecting public health. Meeting air emission requirements is paramount to the successful implementation of any biopower project. A case study was conducted by collecting field data from a wastewater treatment plant that employs anaerobic codigestion of fats, oils, and grease (FOG), food waste, and wastewater sludge, and also uses an internal combustion (IC) engine to generate biopower using the biogas. This research project generated scientific information on (a) quality and quantity of biogas from anaerobic codigestion of food waste and municipal wastewater sludge, (b) levels of contaminants in raw biogas that may affect beneficial uses of the biogas, (c) removal of the contaminants by the biogas conditioning systems, (d) emissions of NO_x, SO₂, CO, CO₂, and methane, and (e) types and levels of air toxics present in the exhausts of the IC engine fueled by the biogas. The information is valuable to those who consider similar operations (i.e., co-digestion of food waste with municipal wastewater sludge and power generation using the produced biogas) and to support rulemaking decisions with regards to air quality issues for such applications.

Implications: Full-scale operation of anaerobic codigestion of food waste with municipal sludge is viable, but it is still new. There is a lack of readily available scientific information on the quality of raw biogas, as well as on potential emissions from power generation using this biogas. This research developed scientific information with regard to quality and quantity of biogas from anaerobic co-digestion of food waste and municipal wastewater sludge, as well as impacts on air quality from biopower generation using this biogas. The need and performance of conditioning/pretreatment systems for biopower generation were also assessed.     

Determination of levoglucosan and its isomers in size fractions of aerosol standard reference materials

The present study tested the extraction efficiency and quantification reproducibility of anhydrosugars in a series of NIST SRMs using two extraction protocols and isotopically-labeled (d₇-levoglucosan) vs. chemically analogous (sedoheptulosan) surrogates. In both instances, levoglucosan concentrations in the different versions of the Washington, D.C. urban dust standard (SRM 1649, 1649a, 1649b, and RM 8785) were similar. The present test also showed that levoglucosan concentrations were not affected by long-term shelf storage of dry material. Variability of analyses were similar for both surrogates and averaged <5%. Surrogate recoveries were shown to average 103 ± 7% and 97 ± 7% for d₇-levoglucosan and sedoheptulosan, respectively. The choice of solvent was shown to affect recoveries the most (but not variability). Levoglucosan concentrations were either seriously underestimated or overestimated with ethyl acetate extraction when d₇-levoglucosan or sedoheptulosan was used as surrogate, respectively. These results point to the need to use some fraction of polar solvent (i.e. methanol) in the solvent mixture. Anhydrosugar concentrations in the urban dust from the Czech Republic (candidate SRMs 2786 and 2787) were characterized by 3- to 7-fold higher anhydrosugar concentrations than those observed in the Washington, D.C. urban dust. The internal anhydrosugar signatures (i.e. levoglucosan/mannosan ratio: L/M) confirm the predominance of biomass combustion sources in both SRM series with mixed inputs from hardwood and softwood combustion in the Washington, D.C. urban dust and a predominantly softwood source in the Prague urban dust. The uniform distribution of anhydrosugars, across the particle size distribution of both SRM series, confirms earlier studies that low temperature charred materials contribute significant inputs to atmospheric ultrafine particles with long atmospheric residence time and transport ranges.     

Bioaerosols as contributors to poor air quality in Taichung City, Taiwan

Bioaerosols are a type of suspended sediments that contribute to poor air quality in Taiwan. Bioaerosols include allergens such as: fungi, bacteria, actinomycetes, arthropods and protozoa, as well as microbial products such as mycotoxins, endotoxins and glucans. When allergens and microbial products are suspended in the air, local air quality will be influenced adversely. In addition, when the particle size is small enough to pass through the respiratory tract entering the human body, the health of the local population is also threatened. Therefore, the purpose of this study is to attempt to understand the concentration and types of bacteria and the bacteria numbers for various particle size ranges during a study period of June 2005 to February 2006 in Taichung City, Central Taiwan. The results indicate that the total average bacterial concentration by using NA medium incubated for 48 h were 8.0 × 10², 1.4 × 10³, 2.4 × 10³ and 1.3 × 10³, 1.9 × 10³, 3.5 × 10³ cfu/m³ for CMES, TRIPS and RFS sampling sites during the daytime and nighttime period of June 2005 to February 2006. Moreover, the total average bacterial concentration by using R₂A medium incubated for 48 h were 8.5 × 10², 1.5 × 10³, 2.2 × 10³ and 1.2 × 10³, 1.7 × 10³, 2.5 × 10³ cfu/m³ for CMES, TRIPS and RFS sampling sites the daytime and nighttime during the same sampling period. The total average bacteria concentration was the same in either NA or R₂A medium for the same sampling times or sites. The total average bacterial concentration was higher in daytime period than that of nighttime period for CMES, TRIPS and RFS sampling sites. The high average bacterial concentration was found in the particle size range of 0.53–0.71 mm (average bioaerosol size was in the range of 2.1–4.7 μm) for each sampling site. Also, 20 kinds of bacteria exceeded levels for each sampling site and were classified as according to shape: rod, coccus and filamentous.     

Aerosol characteristics of different types of episode

Daily and hourly average data from nine air-quality monitoring stations distributed across central Taiwan, which include ten items (i.e., PM₁₀, PM_2.5, wind direction, wind speed, temperature, relative humidity, SO₂, NO₂, NO, and CO), were collected from 2005 to 2009. Four episode types: long-range transport with dust storms (DS), long-range transport with frontal pollution (FP), river dust (RD), and stagnant weather (SW), and one mixed type of episode were identified. Of these four episode types, the SW was the dominant type, averaging about 70 %. The mean ratio of PM_2.5/PM₁₀ was the lowest during the RD episodes (0.42), while the mean ratio of PM_2.5/PM₁₀ was the highest during the SW episodes (0.64). Fine aerosol (PM_2.5) and coarse aerosol (PM_10–2.5) samples were collected by high-volume samplers for chemical composition analysis, from only three stations (Douliou, Lunbei, and Siansi) during the days of SW, RD, DS, and FP. The concentrations of PM_2.5 and three ionic species (NH₄ ⁺, NO₃ ^?, and SO₄ ^2?) all showed significant differences among the four episode types. The highest levels of NO₃ ^? (12.1 μg/m³) and SO₄ ^2? (20.5 μg/m³) were found during the SW and FP episodes, respectively. A comparison on the spatial similarity of aerosol compositions among the episodes and/or non-episodes (control) was characterized by the coefficient of divergence (CD). The results showed higher CD values in PM_10–2.5 than in PM_2.5, and the CD values between RD episodes and the other three episodes were higher than those between two types of episode for the other three episodes. The ratios of SOR (sulfur oxidation ratio), SO₄ ^2?/EC (elemental carbon), NOR (nitrogen oxidation ratio), and NO₃ ^?/EC showed that sulfate formation was most rapid during the FP, while nitrate formation was most rapid during the SW.     

Late-onset growth restriction in Galloway–Mowat syndrome: a case report

Galloway–Mowat syndrome (GMS) is a rare autosomal recessive disorder and is characterized by marked intrauterine growth retardation, central nervous system anomalies, and early onset nephrotic syndrome. Of the reported cases in the literature, all were diagnosed postnatally. We describe a case of GMS in which only late-onset intrauterine growth restriction was detected by prenatal ultrasound. In her fourth pregnancy, the mother had delivered a male baby with clinical features of GMS who died at seven months of age due to early onset of nephrotic syndrome. In her fifth pregnancy, serial ultrasound examinations were normal during the first and second trimester of pregnancy. Growth restriction and microcephaly were not detectable until 28 to 32 weeks' gestation. At 40 weeks' gestation, a female baby was born with dysmorphic features of GMS. Nephrotic syndrome developed after birth and renal biopsy revealed minimal change nephrotic syndrome. The prenatal course of this case suggests GMS may not be diagnosed in early pregnancy and the only abnormality detected before birth was intrauterine growth restriction. Copyright © 2005 John Wiley & Sons, Ltd.     

Study on safe air transporting velocity of nanograde aluminum,iron, and titanium

The process of delivering nanograde metal powders by a high-speed carrier gas is often subject to high explosion risks. This study adopted initial flow rates of 13.1, 8.5, 6.5, and 3.5 m/s for air transporting 30-nm titanium powder, 35-nm iron powder, and 35-nm aluminum powder to gauge the impact on a pipe bend in a 20-l-apparatus. The test results revealed that the 30-nm titanium powder caused an explosion at all initial flow rates; the 35-nm iron powder also caused an explosion, but dust explosion and sintering were eliminated when the flow rate was adjusted to less than 3.5 m/s; and the 35-nm aluminum powder exhibited no explosion or sintering at all flow rates. When pure nitrogen was used for transporting nanograde metal powders, no explosions occurred for all the three types of metal powders. The minimum ignition energy for these three types of nanograde metal powders was less than 1 mJ.     

Emergency response plan for boiler explosion with toxic chemical releases at Nan-Kung industrial park in central Taiwan

A large amount of hazardous materials and equipment has been extensively employed to produce useful chemicals for our daily lives, but many serious accidents, such as fires, explosions, toxic releases, and so on, that harm human beings and impact the environment have occurred during preparation, operation, and transportation of these chemicals. On 17 May 2007, a toxic release from a boiler explosion in a chemical firm triggered a large amount of xylene (7 ton), isopropanol (8 ton), phosphorus trichloride (44.7 ton), and dimethyl formamide (DMF) (1.37 ton) to be released to the atmosphere with total damages of 2000 m² level ground. Through concerted efforts from the Yunlin Emergency Response Information Center (YERIC), sponsored by the Environmental Protection Administration (EPA) of Taiwan and other government sectors, this accident was eventually well controlled after 37 h with 107 people being involved in the rescue action. This study could be applied to lessen the degree of hazard for relevant accidents with an emergency response plan (ERP), and, via Fourier transform infrared (FTIR) spectroscopy and photo ionization detector (PID) the toxic concentrations of airborne chemicals that occurred in the industrial area could be analyzed.     

Associations of long-term ambient air pollution and traffic-related pollution with blood pressure and hypertension defined by the different guidelines worldwide: the CHCN-BTH study

Environmental Science and Pollution Research - The assessment of the generalization of the strict hypertension definition in the 2017 ACC/AHA Hypertension Guideline from environmental condition...     

Influence of solution acidity and CaCl2 concentration on the removal of heavy metals from metal-contaminated rice soils

Soil washing is considered a useful technique for remediating metal-contaminated soils. This study examined the release edges of Cd, Zn, Ni, Cr, Cu or Pb in two contaminated rice soils from central Taiwan. The concentrations exceeding the trigger levels established by the regulatory agency of Taiwan were Cu, Zn, Ni and Cr for the Ho-Mei soil and Pb for the Nan-Tou soil. Successive extractions with HCl ranging from 0 to 0.2 M showed increased release of the heavy metals with declining pH, and the threshold pH value below which a sharp increase in the releases of the heavy metals was highest for Cd, Zn, and Ni (pH 4.6 to 4.9), intermediate for Pb and Cu (3.1 to 3.8) and lowest for Fe (2.1), Al (2.2) and Cr (1.7) for the soils. The low response slope of Ni and Cr particularly for the rice soils make soil washing with the acid up to the highest concentration used ineffective to reduce their concentrations to below trigger levels. Although soil washing with 0.1 M HCl was moderately effective in reducing Cu, Pb, Zn and Cd, which brought pH of the soils to 1.1+/-0.1 (S.D.), the concurrent release of large quantities of Fe and Al make this remediation technique undesirable for the rice soils containing high clay. Successive washings with 0.01 M HCl could be considered an alternative as the dissolution of Fe and Al was minimal, and between 46 to 64% of Cd, Zn, and Cu for the Ho-Mei soil and 45% of Pb in the Na-Tou soil were extracted after four successive extractions with this dilute acid solution. The efficacy of Cd extraction improved if CaCl2 was added to the acid solution. The correlation analysis revealed that Cr extracted was highly correlated (P < 0.001) with Fe extracted, whereas the Cu, Ni, Zn, Cd or Pb extracted was better correlated (P < 0.001) with Al than with Fe extracted. It is possible that the past seasonal soil flooding and drainage in the soils for rice production was conducive to incorporating Cr within the structure of Fe oxide, thereby making them extremely insoluble even in 0.2 M HCl solution. The formation of solid solution of Ni with Al oxide was also possible, making it far less extractable than Cd, Zn, Cu, or Pb with the acid concentrations used.